Analog displays – Extron Electronics ImageStar HD User Manual

Page 31

Text mode
Original mode

IMAGESTAR HD USER GUIDE

Section 2: Installation

I460GB issue 4

Page 31

Analog Displays

Connect analog display devices to the outputs using suitable DVI-A type connectors and cables.

NOTE: 15-pin RGB type connectors and cables can also be used with DVI-A to 15-pin adapters as
shown below. However, this method may prevent ‘wide’ modes (e.g. WXGA) from displaying correctly.

The diagram below shows the default output mapping for a 2×2 target display:

NOTE: For pin-out details of the
DVI-I outputs, see page 53.