Extron Electronics ImageStar HD - Manual (Page 18)

Section 1: Introduction IMAGESTAR HD USER GUIDE
Page 18 I460GB issue 4
Accessories
Supplied Accessories
In addition to this User Guide, the ImageStar HD is supplied with the following accessories. If any of
these items is missing or damaged, please contact your Electrosonic dealer immediately:
Item Qty Re-order Code
12V Power Supply Unit (PSU)
1 ES5555-PSU
IEC Mains Cord for PSU
(with 3-pin ‘Edison’ plug)
For use in the USA.
1 CA4291LF
IEC Mains Cord for PSU
(unterminated)
For use in Europe and all other countries.
See page 25 for plug wiring instructions.
1 CA429LF
DVI-A to 15-pin HD Adapter
Used to connect 15-pin VGA style
connectors to the DVI outputs.
4 CA10026LF
System Disc
A CD containing user documentation,
support information, firmware files and
configuration software.
1 M20080
Optional Accessories
The following optional accessories are also available for use with the ImageStar HD – these must
be ordered separately from your Electrosonic dealer:
Item Order Code
Rack Mounting Kit
A kit that allows an ImageStar HD to be installed in a 19inch
equipment rack. Full instructions are included with the kit.
ES5555-RM