Extron Electronics ImageStar HD - Manual (Page 43)

IMAGESTAR HD USER GUIDE Section 3: Configuration
I460GB issue 4 Page 43
Setting-up Network Communications
Adding ImageStar HD Devices
If the PC or laptop running ImageStar HD Configuration is connected to the same network as an
ImageStar HD processor, use the Discovery function as described below to find it and add it to the list
of devices.
If you are working ‘offline’ you can add an ImageStar HD device manually (see page 45).
To add a device using the Discovery Function…
Click the Window menu and choose ImageStar HD Discovery.
The
ImageStar HD Discovery window will open:
Click the Discovery menu and choose Discover to check for active ImageStar HD devices
on the network.
Any devices found will be listed by their current IP Address:
Click on a device IP Address to highlight it.
Click the Discovery menu and choose Add to Network.