Changing network settings for a device, Removing a device – Extron Electronics ImageStar HD User Manual

Page 46

Section 3: Configuration

IMAGESTAR HD USER GUIDE

Page 46

I460GB issue 4

Changing Network Settings for a Device

In the

Network window, double-click the Local Name of the required device.

The

ImageStar HD Node dialog box will appear:

If required, change the

Local name label to something more meaningful.

NOTE: The Node name currently serves no purpose and can be ignored.

Enter a suitable

Node IP address and Subnet mask for the device.

NOTE: The Gateway address currently serves no purpose and can be left as zeros.

When the details are correct, click

OK.

IMPORTANT: You will need to ‘connect’ to the device and ‘update’ it for the new network

settings to take effect (see page 47).

Removing a Device

In the

Network window, click the Local Name of the required device.

Click the

Network menu and choose Remove.