Extron Electronics ImageStar HD - Manual (Page 60)

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 60 I460GB issue 4
Setting the Correct Overscan
Ensure that the ImageStar HD is currently connected (see page 57).
Click on the Wall Layout window to highlight it.
Click the Layout menu and choose Set overscan.
The Interactive Overscan dialog will appear:
Adjust either the absolute values H and V or percentage values H% and V% as required,
using the spin controls or by typing a value directly into a field.
For example, if the display devices have an overscan of 7%, set both H% and V% to 7.
Click Send to update the display with the new settings.
HINT: By selecting the Auto checkbox, each click of the spin controls will update the target
display without needing to click Send. This is useful for making small adjustments.
Typing a value and pressing the Enter key will also update the display immediately.