Extron Electronics ImageStar HD - Manual (Page 44)

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 44 I460GB issue 4
A new device entry will appear in both the Network and ImageStar HD Devices windows:
If you need to change the device name or IP settings for this device, please refer to ‘Changing
Network Settings for a Device’ on page 46.
IMPORTANT: Remember that in order to communicate with an ImageStar HD device, it
must be on the same subnet as the control PC/laptop (see page 40).
Otherwise, you can now move on to ‘Setting-up ImageStar HD Inputs’ on page 50.
HINT: By activating Link Selection in the Window menu, selecting a device in either the
Network or ImageStar HD Devices windows will automatically select/highlight the
corresponding device entry in the other window.