Extron Electronics IPCP 505 User Guide - Manual (Page 48)

IPCP 505 • Software-based Configuration and Control 42
Email Alerts
In this page you can specify the IP address and domain name of the web server, set up
SMTP verification credentials, and specify the addresses of e-mail alert recipients and which
e-mail file they will be sent.
Figure 31. An Email Alerts Embedded Web Page
Firmware Upgrade
Through this page you can locate and load new firmware to the unit.
Figure 32. A Firmware Upgrade Embedded Web Page
NOTE: See the Firmware
Updates section
(page 78) for
instructions on how to
update the firmware.
NOTE: Save the existing
configuration project
before replacing the
firmware.