Extron Electronics IPCP 505 User Guide - Manual (Page 12)

IPCP 505 • Introduction 6
System Requirements
The IPCP 505, Global Configurator, and GUI Configurator have the following minimum
hardware and software requirements:
Hardware Requirements
Global Configurator GUI Configurator
Processor Intel ® Pentium ® III, 1 GHz Intel Pentium 4 or AMD ™ Athlon ™
RAM 512 MB 1 GB (2 GB is recommended for
multiple or large projects)
Available hard disk
space 50 MB 100 MB
Screen resolution 1024x768
A network connection with a minimum data transfer rate of 10 Mbps
(100 Mbps is recommended)
Software Requirements
Global Configurator and
GlobalViewer GUI Configurator
Operating system • Microsoft ® Windows ® XP,
service pack 2
• Windows Vista ®
or
• Windows 7
• Microsoft Windows XP,
service pack 3
• Windows Vista
or
• Windows 7
ATTENTION: Do not run Global Configurator
software on a PC that uses an earlier version of
Windows.
Microsoft Windows Script version 5.6
Microsoft .NET framework version 4.0 or higher
Browser Microsoft Internet Explorer ®
version 6.0 or higher
with ActiveX
® enabled
NOTE: GUI Configurator is used to set up any Extron TouchLink touchpanel that will be
used with the IPCP.