Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 85)

WQL-Cond Maintenance, cleaning, storage
181 ba75822e01 03/2011
12.3.3 Resetting the battery counter
For the battery status to be displayed correctly, the battery counter must be
reset on installing a new battery.
Proceed as follows:
Resetting the
battery counter
Note
The battery status is also displayed while you are setting up a logging job
(see section 8.3 S
ETTING THE PARAMETERS AND STARTING THE LOGGING JOB ).
1 In the Device menu, select the menu item, Battery manager.
The Battery manager window appears. Select the Reset button.
1 A security prompt appears. Confirm the reset with OK.