Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 35)

WQL-Cond Calibration in control standard (determining the cell constant)
131 ba75822e01 03/2011
7 Accept the calibration with Accept. The message Calibration
successful appears and the new calibration will now be used for
measurement.
If you press Cancel, the logger discards the new calibration and will
continue to use the previous calibration values.
Note
The calibration history with the data of the last 20 calibration procedures can
be displayed at any time (see section 6.4 V
IEWING THE CALIBRATION
HISTORY
).