Ee section 8.3 s, Etting, Parameters – Xylem WQL-Cond CONDUCTIVITY DATALOGGERS User Manual
Page 48: Starting, Logging, Section 8.3 s
Logging
WQL-Cond
144
ba75822e01
03/2011
8.3
Setting the parameters and starting the logging job
To change one or several of the above listed settings proceed as follows:
1
Connect the WQL-Cond logger to the PC with the USB cable.
2
Start the WQL-Log program.
The Login window appears.
3
Confirm with OK. The WQL-Log program searches for the connection
with the logger.
4
Confirm with OK.
5
If the logger contains new data:
A window with the current logging jobs appears.