Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 53)

WQL-Cond Logging
149 ba75822e01 03/2011
19 Click the Parameter tab.
20 Make the settings for the measuring mode and temperature
compensation and if necessary, for the reference temperature and
temperature compensation as well.
21 Save the settings for the logging job (configuration) as required (see
section 8.4 L
OGGING JOB - STORING OR LOADING THE CONFIGURATION ).
Note
In the Logging tab, the memory capacity required with the selected settings
is displayed at the bottom (number x of 600,000 possible datasets).