6 starting the wql-log program, Starting the wql-log program – Xylem WQL-Cond CONDUCTIVITY DATALOGGERS User Manual
Page 23
WQL-Cond
Commissioning
119
ba75822e01
03/2011
3.6
Starting the WQL-Log program
Connection to
logger
1
Start the WQL-Log program.
The Login window appears.
2
If necessary, you can change the display language here with the
menu item, Display (see section 4.1 S
) and find
out which software version of the WQL-Log program is installed with
the menu item, Help (see section 10.3 P
).
3
If the WQL-Cond logger is connected to the PC via a USB cable and
should communicate with the WQL-Log PC program:
Confirm with OK. The WQL-Log program searches for the connection
with the logger.
4
Confirm with OK. The data window appears.
If there are no data in the database (such as during the initial
commissioning), an empty data window appears.
If data are stored in the logger, an overview of the logging jobs
appears first (see section 8.8 M
).