Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 25)

WQL-Cond Setting the display
121 ba75822e01 03/2011
4 Setting the display
Under the Display menu item you can set the language and temperature for
the WQL-Log PC program and the WQL-Cond logger. You can additionally
set whether or not a cursor with a value field with time, date and measured
value should appear for each measured parameter in the data window.
4.1 Setting the language
4.2 Setting the temperature unit
1 In the Display menu, select the menu item, Language.
2 The options Deutsch (German) and Englisch (English) appear.
3 Select the required language with a mouse click.
The setting is immediately active.
1 In the Display menu, select the menu item, Temperature unit.
2 The options, ° C (degrees Celsius) and ° F (degrees Fahrenheit)
appear.
3 Select the required temperature unit with a mouse click.
The setting is immediately active.