11 resetting the logger – Xylem WQL-Cond CONDUCTIVITY DATALOGGERS User Manual
Page 81

WQL-Cond
Resetting the logger
177
ba75822e01
03/2011
11
Resetting the logger
You can reset to the default condition the logger and the PC program with its
settings.
In the default condition, the settings are as follows:
Resetting to
default condition
To reset the logger and PC program to the default condition, proceed as
follows:
Configuration parameters
Setting
Logging interval
1 second
Start of the logging
Logger key button
End of the logging
Time period
1 hour
Measured value ID
default
Measuring mode
Conductivity
Temperature compensation
nLF
Temperature coefficient
2.000
Reference temperature
25 °C
Cell constant
0.475 cm
-1
TDS factor
1.00
Date, time
01.01.2003, 00:00
Calibration records
None
Notes
z
The Device / Reset function deletes the calibration records as well as all
measurement data from the logger! Before deleting the logger memory,
make sure that you have imported to the database all data you want to
keep.
z
The battery counter is not reset with the Device / Reset function. It has to
be reset with the reset function of the battery manager.
1
In the Device menu, click the menu item, Reset. A security prompt
appears.
2
Confirm with OK. The settings are reset to the default condition.