Xylem WQL-Cond CONDUCTIVITY DATALOGGERS - Manual (Page 6)

Overview WQL-Cond
102 ba75822e01 03/2011
Recommended
fields of
application
Conductivity measurements in wells, bore holes, rivers, water bodies and
other surface water, drinking water, ground water, leachate, waste water.
1.2 PC program WQL-Log
The WQL-Log PC program serves to operate a connected WTW data logger
of the WQL series type. The WQL-Log PC program automatically recognizes
the logger when it is connected to the USB interface and controls the menus
according to the type and measured parameter.
The PC program can carry out the following functions:
z
Calibrate the measuring system
z Set up and start a logging job
z Measure directly: The logger is connected to the PC via USB and the PC
program displays the current measured values.
z Read in measurement data of the logging job: Consistent data copying to
a PC-based database.
z Database-supported evaluation of measurement data, export functions
Note
The current version of the WQL-Log PC program and the current firmware
for the WQL-Cond logger is available on the Internet on the website of the
manufacturer of your meter.