4 viewing the calibration history, Viewing the calibration history, Y time (see section 6.4 v – Xylem WQL-Cond CONDUCTIVITY DATALOGGERS User Manual
Page 40: Iewing, Calibration, History

Calibration in control standard (determining the cell constant)
WQL-Cond
136
ba75822e01
03/2011
6.4
Viewing the calibration history
The last 20 calibration records are stored in the logger and can be recalled.
Proceed as follows:
1
In the Device menu, select the Set menu item, and select the
measuring mode for which the calibration history should be
displayed.
2
In the Device menu, click the menu item, Calibrate.
3
The calibration window appears.
4
Click the menu item, Calibration history. The program reads the
calibration data of the set measuring mode.
5
The calibration history with the data of the last 20 calibration
procedures appears. Use the arrows on the side to scroll up or down.