Bell & Gossett S14334B Technologic 5500 Series Variable Primary Pump and Valve Controller - Manual (Page 35)

35
6.13.4.4 System Reset Log
From the Operation Log Menu, shown in section
6.13.4, press ALTERNATION/4 and ENTER to get to
the System Reset Log screen shown below.
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
The first column shows the date. The second column
shows the time. The third column shows the type of
command for system reset that occurred at the given
time. Press the CLEAR key to exit this screen.
6.13.4.5 Control Logger
From the Operation Log Menu, shown in section
6.13.4, press F1/LOG/5 and ENTER to get to the
Control Logger screen shown below.
MMDD HHMMSS $$$$$
MMDD HHMMSS $$$$$
MMDD HHMMSS $$$$$
MMDD HHMMSS $$$$$
The first column shows the date. The second column
shows the time. The third column shows the control
event that occurred at the given time. Press the
CLEAR key to exit this screen.
6.13.5 Power Log
From the Logging Menu, shown in section 6.13, press
F1/LOG/5 and ENTER to get to the Power Log screen
shown below.
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
The first column shows the date. The second column
shows the time. The third column shows the type of
command, Pwr Up or Pwr Dn, that occurred at the
given time. Press the CLEAR key to exit this screen.
6.13.6 Service Log Menu
From the Logging Menu, shown in section 6.13, press
F2/6 and ENTER to get to the Service Log Menu
shown below.
Selection: # Exit = 0
1 = Error Log
2 = Operating Hours
6.13.6.1 Error Log
From the Service Log Menu, shown in section 6.13.6,
press PROCESS VARIABLE/1 and ENTER to get to
the Error Log screen shown below.
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
MMDDYY HHMMSS $$$$$
The first column shows the date. The second column
shows the time. The third column shows system
error code for the error that occurred at the given
time. Press the CLEAR key to exit this screen.
6.13.6.2 Operating Hours Log
From the Service Log Menu, shown in section 6.13.6,
press SET POINT/2 and ENTER to get to the Oper-
ating Hours Log screen shown below.
Operating Since
MM/DD/YY HH:MM:SS
Total Hours ####
The Operating Hours screen shows the date and time
when the controller was configured. Total Hours shows
how long the controller has had power applied.
Press the CLEAR key to exit this screen.
6.14 Maintenance (Physical)
6.14.1 Electrical
No maintenance is required for the electrical panel
except to keep the modules free of dirt and dust that
might hold moisture. Cabinet door should be kept
closed, and the components kept dry.
6.14.2 Mechanical
If a B&G pump was supplied it was lubricated at the
factory. Future lubrication should be according to
the instructions that came with the pump.
If there is a danger of freezing, drain the pump. In-
spect pump and system piping regularly.
For leaky seals or gaskets and loose or damaged com-
ponents, replace or repair as required.
For more instruction on B&G parts see Table 36 for a
list of manuals.
Manual # Description
A91310I Suction Diffuser Instruction Sheet
PO6451A Series 60 Pump Installation & Operation
PO6452 Series 60 Pump Service
P70620A Series 3510 Centrifugal Pumps
P70621B Series 3531 Centrifugal Pump
P81547A Series 90 In-Line Mounted Pumps
P81555B Series 1510 Pump Kit Instructions
P81567D Series 1531 Pump Instruction Manual
P81568B Series 1535 Pump Instruction Sheet
P81569A Series 1522 Pump Instruction Sheet
P81629C Series 80 Pump Instruction Manual
P81630C VSC & VSCS Instruction Manual
P81673E Series 1510/Universal Pump Instruction Sheet
P81875A Series HSC Centrifugal Pump
P95200B Series 1550 Pump Instruction Sheet
V50960B Triple Duty Valve with Soft Seat
None Flow Transmitter
None Temp/Pressure Transmitter
None Misc. Transmitter
Table 36: List of Manuals