YSI 5500D-1 - Manual (Page 88)

YSI 5X00
174
systems are reset causing relays to energize/de-energize based on the system value/
condition. Timer systems are not reset. To reset timer systems, turn power off and
then on to the 5X00. Press
to exit Service Hold.
The Run Screen displays a clock count down of the Service Hold remaining time.
Notes:
- If a timer is active (relay energized) at service hold, the relay will not reenergize
after service hold expires regardless if timer time has not expired. There is
only one “on” time for all timer systems.
- Entering Downloader mode places 5X00 into Service Hold.
- “Inst. Service Hold” is displayed on any AquaManager map icon associated
with an instrument in Service Hold. AquaManager alarm emails are not sent
for any alarm condition for a 5X00 that is in Service Hold.
- 5X00 alarm emails are not sent during service hold.
Configuring the 5X00
5 AquaManager
-Installing
-Registration