YSI 5500D-1 - Manual (Page 67)

YSI 5X00
133
YSI 5X00
132
4. Press to save configuration and return to Run Screen.
Notes:
- Display contrast, backlight timer, and buzzer can only be reset to factory
defaults through this menu.
- Sensors must be recalibrated after performing a factory Reset All and/or
Reset Sensor.
Reset System
Menus → System → Service→ Reset To Factory→ Reset System
Specific systems or all systems in the Reset System menu can be reset to factory
defaults.
1. Use
▲
and
▼
to scroll and highlight submenus.
2. Press

to select.
3. When prompted, “Are you sure?”, select one of the following to confirm,
4. Press to save configuration and return to Run Screen.
Reset Sensors
Menus → System → Service→ Reset To Factory→ Reset Sensors
Specific sensors, aux system, or all sensor and aux systems listed in the Reset Sensors
menu can be reset to factory default.
Configuring the 5X00
1. Use
▲
and
▼
to scroll and highlight submenus.
2. Press

to select.
3. When prompted, “Are you sure?”, select one of the following to confirm,
4. Press to save configuration and return to Run Screen.
Note:
- Perform a sensor calibration after resetting a sensor to factory default.
Reset Timers
Menus → System → Service→ Reset To Factory→ Reset Timers
A specific timer, feed timer, or all timers listed in the Reset Timers menu can be
reset to factory defaults.
1. Use
▲
and
▼
to scroll and highlight submenus.
2. Press

to select.
3. When prompted, “Are you sure?”, select one of the following to confirm,
4. Press to save configuration and return to Run Screen.
Configuring the 5X00