YSI 5500D-1 - Manual (Page 112)

YSI 5X00
223
YSI 5X00
222
Menu Maps

continued next page
Run Screen → Menus → Sensor Setup → DO1‐4
Sensor Setup
*DO‐1
DO‐2
DO‐3
DO‐4
DO (Enabled)
Control Mode (Set Point)
T
Set Point
PID/PWM
Alarms (Disabled)
Probe Type
T
Galvanic
Membrane Type (Teflon 2.0mil)
Display Format (mg/l)
T
mg/l
Sat
mg/l and Sat
mg/l and Temp
Sat and Temp
mg/l, Sat and Temp
Salinity (0 ppt)
0‐80 ppt
Elevation (0 Feet)
0‐200X100ft
5400 only Temp Source (User Defined) 25.0c
T
User Defined
Aux 3
Aux 4
Aux 5
Aux 6
Temp Display Format (Celsius)
T
Fahrenheit
Celsius
Alarm Low (3.50 mg/l)*
0.0 to 60.0 mg/l
Relay (Disabled)
Alarm Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Relay 8
*number of DO systems
displayed is based on model
number and enabled DO
systems
Menu Maps

continued next page
Run Screen → Menus → Sensor Setup →
DO 1‐ 4 continued from previous page
Sensor Setup
Set Point control only Range Low 2 (4.00 mg/l)*
4.0 to 60.0 mg/l
Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Relay 8
Set Point control only Range Low (5.00 mg/l)*
5.0 to 60.0 mg/l
Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Relay 8
Set Point (8.00 mg/l)*
PID/PWM control only Control Up/Down (Rising)
T
Rising
Falling
P I D M d P.I.D. Mode
T
Sat
mg/l
PID/PWM control only P.I.D. Interval (100.00)
1.00 to 999.90
PID/PWM control only P.I.D. Reset Interval (20.00)
1.00 to 999.90
PID/PWM control only P.I.D. Gain (2000)
0.00 to 10.00
1.00 to 999.90