GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives - Manual (Page 52)

4-22
•
Chapter 4 Configuring an AVDV Series Drive GEH-6405A Toolbox for an AVDV Series Drive
Toolbox/Drive Communications
The toolbox can communicate with the drive through an RS-232C/RS-485 serial port
connection. However, only one drive at a time can be selected to go online
(communicate). Refer to the next section, Connecting to an AVDV Series Drive.
The serial port connection settings used by the toolbox can be defined and modified.
These settings are saved and used by the toolbox for every connection to a drive
whose drive configuration file is set to communicate serially.
À
To modify the communications setting
1. From the Options menu, choose Settings .
2. Click on the tab, AVDV Series Drive .
3. Modify the Serial Port Communications settings, as desired.
Settings
Note Depending on the products installed, all of the following tabs may not be
available.
This option changes the
names used on the
diagrams and Outline View
to internal names used
mainly by firmware
developers. It should not
be checked.
Click on the drop-down box to choose the
communication port.