GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives - Manual (Page 23)

GEH-6405A Toolbox for an AVDV Series Drive Chapter 3 Using the Toolbox
•
3-5
Accessing Online Help
To obtain Help for the dialog
box on the screen, press
F1
.
Specific dialog box Help is available by pressing the F1 function key, when a dialog
box is displayed. Help can also be accessed using the following methods:
To obtain Help on . . . Do this . . .
Menu commands Highlight the command and press F1
Dialog boxes Press F1 when the dialog box displays on the screen
Block information Click on the desired block with the right mouse button
and choose Item Help
Help contents Choose the Help menu and choose Contents
Help Choose the Help menu and choose Using Help
Specific word(s) Choose the Help menu, choose Contents, and choose
the tab Find, then enter the word(s) to search
Privilege/Password
Refer to the next section to
change the password. The privilege/password system assigns different levels of access to the devices.
Then, passwords can be established for the different privilege levels, so that each
user can access a device at the level necessary for the job that person is assigned.
À
To set a privilege level
w
From the Options menu, choose Privilege.
Enter a three-character ID,
such as your initials.
Click OK.
Privilege Level Functions
A password can be assigned to each of the five toolbox privilege levels defined
below. Each successive level allows all the functions of the previous level. The
levels are defined in the table, Privilege Levels (below).
To avoid this dialog box,
choose Options menu,
Settings, and the tab General.
At the bottom of the dialog
box in the text box User
Identification, enter your
user ID.