OSRAM QUICKTRONIC INTELLIGENT DIM CFL User Manual
Page 70

69
through intelligent power reduction at high t
c
temperatures
• 5-year system+ guarantee:
For every ECG that failed due to a material or production fault, a
replacement is available
• CELMA energy classification EEI = A1
• Maximum energy efficiency thanks to cut-off technology
• EoL shutdown acc. to EN/IEC 61347-2-3 Section 17
•
For use in emergency lighting systems acc. to EN 50172 / DIN VDE
0108-100
• Configurable emergency current features
•
Light value without control signal adjustable between 100 % and
1 % luminous flux
• Test mark: ENEC, VDE, EMC
•
EN 60929, EN 61347-2-3, EN 55015, EN 61000-3-2, EN 61547,
EN 61000-3-3
QUICKTRONIC
®
INTELLIGENT DALI DIM for T8/Ø 26 mm fluo-
rescent lamps
Ordering designation for each type of lamp: QTi DALI … DIM
• Intelligent ECG with DALI interface according to IEC 60929
•
Commercial T8/Ø 26 mm fluorescent lamps unrestrictedly dim-
mable from 1 % to 100 %
•
Max. dimming speed for dynamic RGB color light applications of
5 ms, from 1 % to 100 % through optimized regulation of the fila-
ment preheating
•
Warm start of the lamp inside 0.5 seconds without switch-on
flash
•
Manual dimming operation (TouchDIM ) without any control gear
with standard installation buttons, incl. memory function (double-
click) and soft start
•
Service life: 50,000 h at maximum thermal load (t
c
= 75 °C, max.
10 % failure)
•
Effective excess temperature protection of the dimming ECG
through intelligent power reduction at high t
c
temperatures
• 5-year system+ guarantee:
For every ECG that failed due to a material or production fault, a
replacement is available
• CELMA energy classification EEI = A1
• Maximum energy efficiency thanks to cut-off technology
• EoL shutdown acc. to EN/IEC 61347-2-3 Section 17
•
For use in emergency lighting systems acc. to EN 50172 / DIN VDE
0108-100
•
Configurable emergency current features, light value without con-
trol signal adjustable between 100 % and 1 % luminous flux
• Test mark: ENEC, VDE, EMC
•
EN 60929, EN 61347-2-3, EN 55015, EN 61000-3-2, EN 61547,
EN 61000-3-3