OSRAM QUICKTRONIC INTELLIGENT DIM CFL - Manual (Page 51)

50
3.7.1 Inserting and releasing the connection cables
Manual cabling of the insulation piercing connection device (above)
with the WAGO insertion tool, e.g. order number: 206-831
Figure 32: Wago insertion tool
Detachment of the contacts (below) with the WAGO 206-830
extraction tool.
1. Insert extraction tool into the line guide above the line
2. Pull out line
Figure 33: Wago extraction tool
Alternatively, the plug contact can be released by simultaneous twist-
ing and pulling.
Release by twisting and pulling
Release by twisting and pulling
or with the aid of the extraction
tool, order no. 0206-0830
Figure 34: Removing the plug contact
The wire stripping lengths and wire cross-sections are printed on the
equipment.