OSRAM Mounting adapters - Manual

OSRAM GmbH
Kunden Service Center
Customer-Service-Center (CSC)
Steinerne Furt 62
86167 Augsburg
Germany
Tel : +49 (0) 1803 677 - 200
(kostenpflichtig / charges apply)
Fax.: +49 (0) 1803 677 - 202
www.osram.com
www.osram.de
40083214100788
4008321410078
Mounting adapter for motion detector
Fitting instructions
VI 2009
Mounting-Adapter_ma0906en_we1.01.indd
Mounting Adapter
D C
C D
B
A
E
F
G
H
Description
Purpose and application
The mounting adapter ensures that OSRAM motion detectors
specifically designed for this device can be simply and securely
mounted in compliance with the CE guidelines.
Design
The mounting adapter is made up of the following components:
• Removable cable guide through adapter wall (A)
• Holders for cable clamps (B)
• Screw holes for attaching the motion detector (C)
• Screw holes for wall mounting (D)
• Cable guide through adapter base (E)
• Removable partition wall (F)
Installation
Safety instructions
The mounting adapter must only be installed and put into opera-
tion by a qualified electrician. The applicable safety regulations
and accident prevention regulations must be observed.
WARNING!
Exposed, live cables or damaged housing.
Danger of electric shock!
• Only work on the motion detector when it is
de-energised.
Procedure
 Select the installation location. Follow the fitting instructions
of the motion detector.
‚ Insert the cable clamps in the holders (B).
ƒ Pass the connection cable through the cable guide:
– Surface-mounting (G): use cable guide through adapter
wall
– Flush-mounting (H): use cable guide through adapter
base
„ Attach the mounting adapter to the wall or ceiling via the
screw holes (D).
Attach the connection cable to the cable clamps.
† Attach the motion detector via the screw holes (C) on the
mounting adapter. Follow the fitting instructions of the motion
detector.
Continued on the back page!