Ocean Optics ElliCalc - Manual (Page 17)

Ocean Optics Germany GmbH Thin Film Metrology
16
7 Detailed features of ElliCalc
In this chapter the most common commands and menus of ElliCalc are decribed.
Special commands and menus for “SCOUT mode” and for ElliCalc’s “internal mode” are decribed in later
chapters.
7.1 Main menu “File”
7.1.1 Load layer recipe
This routine loads a layer recipe that has been saved earlier (extension: .lrc). Do not change the extension
.lrc.
In SCOUT mode you may either load another SCOUT recipe (“load Scout layer recipe”) or you may switch
to ElliCalcs internal mode (“Load Ellicalc layer recipe”). See the screenshots above.
In SCOUT mode all buttons captions are in italic, otherwise in normal.
It is assumed that all .lrc-files are in the default directory “ElliCalc\recipes\layer_recipes”, but you can
change the directory path to any other directory on your PC (provided that you did not use "UseLastFile-
names_EC=False" in section [Filenames_EC] in Thinfilm.ini).
Internal mode SCOUT mode