B&B Electronics WLNN-EK-DP551 - User Manual - Manual (Page 50)

B&B Electronics
50
Airborne Enterprise WLNN EVB Users Guide
FIGURE 29 - FIRMWARE UPDATE COMPLETE
TABLE 51 - UPDATING FIRMWARE
Step Description
Navigation Bar
Select Maintenance
This will open a window showing the current
module status.
Feature Bar
Select Update Module Firmware
You will see a window open with field to enter the
location of the module firmware you want to
upload.
The current firmware version number is displayed at
the top of the page.
Press Browse... Button This will open a dialog box in which you can locate the
firmware image you wish to upload to the module.
Select the firmware image file and press Open.
This will return you to the Upload Firmware window
and will have entered the location and file name of the
firmware image you wish to upload in the field next to
the Browse… button.
Press Load New Firmware You will then see a notice that the firmware upload
has begun (Figure 28).
When the upload has been completed successfully
and the firmware updated w window indicating this
will be shown (Figure 29).
Press Reboot This will restart the module and the new firmware will
be loaded.

DO NOT REMOVE POWER FROM THE MODULE DURING THE FIRMWARE
UPDATE CYCLE.
This may cause the device to become non-operational. If this happens please contact
B&B Electronics Technical Support.