B&B Electronics WLNN-EK-DP551 - User Manual - Manual (Page 43)

B&B Electronics
Airborne Enterprise WLNN EVB Users Guide 43
 
The HyperTerminal application will then attempt to open a TCP session with the
module, Connecting is shown in the status bar at the bottom-left side of the
screen as HyperTerminal tries to make the Telnet connection. When the
connection is made, Connecting is replaced by Connected. You can know
interact with the Airborne Device Server, to authenticate with the module type
auth dpac dpac.
After the connection is authenticated you can enter CLI commands e.g. type wl-
info to view basic information on the module.
For more information on the full CLI command set please refer to the Command
Line Reference Manuals.
The above process can be achieved by any of the available Terminal Emulation
programs. Please follow the specific applications requirements to make the TCP/IP
connection and authenticate with the module.