B&B Electronics WLNN-EK-DP551 - User Manual - Manual (Page 48)

B&B Electronics
48
Airborne Enterprise WLNN EVB Users Guide
 
TABLE 50 - UPLOADING CONFIGURATIONS
Step Description
Navigation Bar
Select Configuration
You will see major WLAN parameters displayed.
Feature Bar
Select Upload Configuration File
You will see a window open with field to enter the
location of the configuration you want to upload, along
with a choice of OEM or User Configuration.
Press Browse... Button This will open a dialog box in which you can locate the
certificate you wish to upload to the module. Select the
configuration file and press Open.
This will return you to the Configuration Upload window
and will have entered the location and file name of the
certificate you wish to upload in the field next to the
Browse… button.
Select User or OEM Configuration This defines the configuration you are installing. OEM
Configurations will survive a factory reset, User will not.
Press Upload Configuration You will then see a notice that the configuration has been
successfully uploaded to the module.
Press List Configuration Files This will show the current configuration files resident on
the module and will include the file just uploaded.
Uploading a configuration file will overwrite any configuration file already stored on
the module. This will cause a change in configuration when a module restart is
performed.
IMPORTANT: Confirm that the OEM or USER settings in the configuration files will
allow the user to communicate with the module after the upload and a restart has
been completed.
10.6 Updating Firmware
The module ’s firmware may be updated using the web interface; please refer to
Table 51 for the procedure to do this.
Updating the firmware will not alter any existing configuration files or certificates
loaded on the module.
You will first need to obtain the version of firmware you wish to install from the
B&B Electronics website or B&B Electronics technical support. The firmware
will be a binary image file (.img) and indicate the version of the firmware in the
file name.
Once you have obtained the firmware, save the firmware image to a location on
the system you are browsing the module from, or a location accessible to the
system you are browsing the module from.