B&B Electronics WLNN-EK-DP551 - User Manual - Manual (Page 36)

B&B Electronics
36
Airborne Enterprise WLNN EVB Users Guide
5.36 TP8 - 10
These test points have been made available for prototyping using the Evaluation
board; they are connected to SW 4 (section 5.33). Please refer to this section for
detail.
6.0 A Typical Development System
It is necessary to have additional equipment to get the most out of the Airborne ™
Evaluation board and fully experience the power of the Airborne ™ Device Server module.
A typical evaluation system includes:
 A host computer that communicates with the Airborne Device Server module, the
interface options are:
WLNN-EK-DP501 via the EVB RS-232 interface (PORT 1, CN1)
WLNN-EK-DP502 via the EVB SPI interface (CN7)
WLNN-EK-DP503 via the EVB RJ-45 interface (ETHERNET, CN4)
 A host computer that communicates with the Airborne Device Server module via
the network interface.
 An IEEE-compliant 802.11b/g/n or 802.11a/n AP (or a Wireless Router) for
which you know the association and authentication settings.
 A DHCP server (this may be resident in the Wireless Router).
 A terminal emulation program like HyperTerminal, PuTTy or TerraTerm