M&C TechGroup CSS-V2 Operator's manual - Manual (Page 28)

28 Gas sampling and gas conditioning technology 4-1.2-ME
18 SPARE PART LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and are not binding.
Gas Conditioning Unit Version CSS-V
(V) Consumables, (E) Recommended Spare Parts and (T) Spare Parts
Recommended quantity after
operation of [years]
Part No.
Description C/R/S 1 2 3
Fine filter FPF-2-0,3GF
90 F 0160 Filter element type F-2-0,3GF. Material:
glass fiber, porosity: 0,3µ 25 pcs./pack. C 1 2 3
90 F 0167 O-ring FPF-2/54. Material: Viton. R 1 1 1
Peristaltic pump SR25.1:
90 P 1007 SR25 pump hose with threaded hose
coupling of PVDF, DN 4/6mm C 1 2 4
90 P 1010 1 set contact spring for driver of peristaltic
pump R25.2, (set = 4 pcs.) C 1 2 3
90 P 1020 Driver complete for peristaltic pump SR25.2 R 1
90 P 1045 Contact pulley (1 pc.) for peristaltic pump
SR25.2, (2 pcs./pump required). C 2 4
Diaphragm pump type N3/5/9 KPE
90P2100
Square cap type D3, 1/8“i for
N3/N5 KPE/KP18. Material: PVDF
S - - 1
90P2120 Diaphragm type S3, for
N3/N5 KPE/KP18,
Material: Viton, PTFE coated C 1 2 3
90P2115 O-ring type O3, for N3/N5 KPE/KP18,
1 pc., Material: Viton (2 pcs. Required) C 2 4 6
90P2110 Valve plate type V3, for N3/N5 KPE/KP18,
1 pc., Material: Viton (2 pcs. Required) C 2 4 6
90P2105 Intermediate plate type Z3, for
N3/N5 KPE/KP18, Material: PVDF S - - 1
90 P 2220 Diaphragm type S9, for
N9 KPE/KP18,
Material: Viton, PTFE coated C 1 2 3
90 P 2211 Valve plate with seal for N9 KPE, 1 pc.,
material: Viton. (2 pcs./pump) C 2 4 6
90 P 2205 Intermediate plate type Z9, for
N9 KPE/KP18, Material: PVDF S - - 1
90 P 2200 Square cap type D 9, 1/8“i for
N9 KPE/KP18. Material: PVDF
S - - 1