EVS Xedio Dispatcher Version 4.35 - October 2013 User Manual - Manual (Page 76)

Here is an example with 4 tracks of stereo channels:
The audio tracks of a loaded media or clip are displayed as follows:
• A stereo track is represented by .
Video and Audio Tracks Selection
When you create a sub-clip, you need to select the video and the requested audio
channels.
Selection of the Video Channel
The Video button is clicked to select or remove the video. So the clip made contains,
or not, the video.
Selection of an Audio Channel
The left and the right loudspeaker buttons of an audio stereo track are used to
select or remove respectively the left or the right channel of the corresponding audio track:
Clicking the left audio button will remove the left audio component from the source so that
the clip made has no left audio channel. In this case, the right channel will be output on the
left and right channels.
Clicking both left and right audio buttons will also remove the right audio component so
that the clip made has no audio channel for this track.
The next table summarizes how the buttons look like depending on the selection:
Selected Removed
Video
Audio
66 4. User Interface
EVS Broadcast Equipment SA Issue 4.35.B - October 2013