EVS Xedio Dispatcher Version 4.35 - October 2013 User Manual - Manual (Page 14)

2. Installation
2.1. Prerequisites
Here is the list of prerequisites to the installation of Xedio Dispatcher:
• Hardware requirements must be met.
• Software requirements must be met.
• The XSecure application needs to be installed on the workstation with all the required
license codes.
• Xedio Dispatcher has to be installed with administrator rights.
• It is recommended to close all other applications before starting the Xedio Dispatcher
installation, especially all EVS applications.
• XDCAM and/or P2 drivers must be installed on the Xedio Dispatcher computer.
2.2. Hardware and Software Requirements
Hardware Requirements
Xedio Dispatcher can be installed on a single laptop or desktop computer.
The browser and player of Xedio Dispatcher use the CPU resources of the Xedio
Dispatcher workstation to decode the A/V material, depending on the source and the
target codecs.
The guidelines for the hardware minimum requirements are:
• CPU:
◦ For 720p and AVC Intra 100: Core i7 2.8 GHz processor (or equivalent)
◦ For all other codecs and video standards: Core Duo 2.33GHz processor (or
equivalent)
• RAM: 3GB
• Display Resolution: minimum 1280x1024
• Gfx Card: no specific needs ("standard" PC Gfx card)
Options:
• USB 2.0, IEEE 1394 (Firewire) and/or PCIe interface(s) depending on the device you
want to connect to Xedio Dispatcher machine (FTP access not supported).
• For Audio monitoring and/or Audio Guide Track: Digigram Audio Board or any other
Audio Board.
4 2. Installation
EVS Broadcast Equipment SA Issue 4.35.B - October 2013