EVS IPDirector Version 6.0 - November 2012 Part 1 User's Manual - Manual (Page 99)

Assigning Channels to Function Buttons
Assignment Modes
Each of the 6 Function buttons can be assigned to a recorder channel, to a player channel
or to the Software Player.
The assignment of channels to Function buttons can be done in two ways:
• Favorite Mode: selected channels are defined in the Remote Control Manager
window. This is done during the configuration of the remote.
• Normal mode: this mode uses all channels of an EVS video server. The server can be
selected from the remote, during its use.
To switch the function buttons assignment between the normal mode and the favorite
mode, press the SHIFT key and then the MENU button.
Assigning Player or Recorder Channels to Function
Buttons in Favorite Mode
How to Assign Player or Recorder Channels to Function Buttons from
the Channel Name Contextual Menu
To assign a recorder channel, a player channel or the Software Player to a Function
button of the BEPlay Remote from the Channel Name field of the Remote Control
Manager window, proceed as follows:
1. In the Remote Control Manager window, right-click one of the Channel Name field. A
contextual menu is displayed:
2. Select a channel or the Software Player.
3. Repeat steps 1 and 2 for all the channels you want to associate to the buttons.
The channel name is displayed in the Channel Name field:
IPDirector - Version 6.00 - User Manual - General Workspace
3. System Management 89