beautypg.com

Guardbands, Default clip duration, Create clips on all synchronized recorders – EVS IPDirector Version 6.0 - November 2012 Part 1 User's Manual User Manual

Page 44: Create sub clips on all ganged clips, Trim all ganged clips, Automatic clip creation based on logs

background image

Guardbands

The guardbands correspond to A/V material which is added on both sides of the clip
boundaries when the clip is created. They are defined in seconds in this setting field.

When a new clip is saved, the guardbands will automatically be added before the IN point
of the clip and after the OUT point of the clip.

Default Clip Duration

The Default Clip Duration setting makes it possible to create a new clip with the default
duration specified in this setting when only the IN point or the OUT point has been defined
and the NEW CLIP button is clicked.

Create Clips on all Synchronized Recorders

When this setting is selected, clips will automatically be created on all recorders ganged
to the recorder on which the user creates a clip.

The clip that the user has created will have the extension 00 after the name and the clips
created on the ganged recorders will have extension 01, 02, etc. depending on the number
of ganged recorders.

Create Sub Clips on all Ganged Clips

If this setting is selected, when a user creates a sub-clip from one linked clip, sub-clips
will automatically be created from all the clips linked to that clip.

If this setting is not checked, a sub-clip will only be created on the selected clip.

Trim all Ganged Clips

If this setting is selected, when a user trims a linked clip, all the clips linked to that clip will
automatically be trimmed.

If this setting is not checked, only the selected clip will be trimmed.

Automatic Clip Creation based on Logs

A clip can be created when a log is dragged into a bin. The current setting is used to define
the duration between the clip IN point and the log timecode (Pre Mark) and the duration
between the log timecode and the clip OUT point (Post Mark).

Default values for the Pre Mark and Post Mark are 10 sec.

For more information on the creation of automatic clips, refer to

the Database Explorer

user manual

.

34

3. System Management

EVS Broadcast Equipment S.A. - November 2012

Issue 6.00.B