EVS IPDirector Version 6.0 - November 2012 Part 1 User's Manual - Manual (Page 84)

2. Select a player channel.
3. Repeat steps 1 and 2 for all the channels you want to associate to the buttons.
The channel name is displayed in the Channel Name field.
How to Assign Player or Recorder Channels to Function Buttons from
the Channel Explorer
To assign player channels to the MPlay Remote by a drag-and-drop operation from the
Channel Explorer, proceed as follows:
1. Open the Channel Explorer.
2. Select the player channel and drag it to one of the fourChannel Name field areas in
the Remote Control Manager window.
The player channel name is displayed in the Channel Name field:
3. If needed, repeat these two steps for the three other Channel Name field areas.
74 3. System Management
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B