EVS IPDirector Version 6.0 - November 2012 Part 1 User's Manual - Manual (Page 51)

Output GPIs Settings
Purpose
The Output GPIs are signals that are sent from an EVS server under the control of the
IPDirector.
The Output GPIs are used to send a signal from the IPDirector to a GPI key at a given
timecode of a playlist played on a given player channel. This signal can then be used to
trigger a record action of the playlist from the given timecode by a third device, for
example a VTR. Up to eight Output GPI commands can be defined.
The Output GPI keys will be unavailable in IPDirector if they have been assigned to the
Remote panel via the Replace function defined on the Remote panel itself.
IPDirector - Version 6.00 - User Manual - General Workspace
3. System Management 41