EVS IPDirector Version 6.0 - November 2012 Part 1 User's Manual - Manual (Page 48)

Input GPIs Settings
The Input GPIs settings make it possible to configure the action to be triggered on a given
player channel of the EVS server when a given key is pressed on a GPI device connected
to this EVS server.
Up to eight GPI inputs can be used on an EVS server.
For each Input GPI, the following information needs to be defined:
• the action triggered by the GPI key on the EVS server.
• the player channel on which the action needs to be executed.
• the type of trigger signal sent by the GPI to EVS server.
In the IPDirector workspace, the triggered action will be reflected in the open applications
to which the player channel has been assigned.
38 3. System Management
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B