Call forwarding profiles, Configuration – AASTRA 1560_1560ip User Guide User Manual
Page 93
Configuration
eud-1431/1.0 – OIP R8.3 – 02.2012
93
Call forwarding profiles
You can specify the destinations for the diversions as standard.
Set the personal call routings in chapter
, page
Setting
Description
Profile controls call forwarding
This forwarding is also activated/deactivated when the pres-
ence profile is activated/deactivated. If unchecked, the settings
are ignored and call forwarding is not activated/deactivated.
Destination
Destination of call forwarding.
Force settings of the profile
Prevents other instances from modifying the forwarding set-
tings defined here, as long as this presence profile is active.
Other instances can be: User interaction through the system
phone or softphone, forwarding destinations of the presence
indicator, Aastra 1560/1560ip or a softphone, default forward-
ing destinations defined in the communication server.
Notes:
• You can only activate 1 call forwarding at a time.
• Personal call routing can simultenously be activated with Call forwarding on busy
or Call forwarding on No Reply.
Configuring call routings:
In the configuration window select the
Profile
dialogue field.
Highlight the profile you want and select the
Call forwardings
tab. Select the
call forwarding you want and click
Change
.
➔
The
Call forwarding
window opens.
Select the destination you want and the relevant settings and click
OK
, then
Apply
to confirm.
➔
The settings are stored.
Note:
You can also open the Call forwarding window using the corresponding sym-
bol in the phone window (see chapter
), or via
Telephony > Call forwarding.
Configuring call routings:
In the configuration window select the
Profile
dialogue field.
Highlight the profile you want and select the
Call forwardings
tab. Tick
Profile
controls personal call routing
, select the call routing you want and click
Apply
to
confirm.
➔
The settings are stored.
eud-1431_POOL_en.book Page 93 Wednesday, February 15, 2012 12:30 PM