AASTRA 1560_1560ip User Guide - Manual (Page 26)

Display symbols, operator prompting and settings
26
eud-1431/1.0 – OIP R8.3 – 02.2012
Audio settings
Here you can select the ring device you want, the ring melody for internal and
external calls, and the voice output settings.
Activate/deactivate acoustic signalling
You can activate or deactivate the acoustic signal as required.
Ring output settings (Aastra 1560ip only)
If you are running the operator application as an IP softphone, indicate the installed
output devices and select the audio files for signalling calls or system messages.
Calls can ring on the internal PC speaker, the media device or another connected
speaker (external speaker).
Select the ring melody you want for internal and external calls.
Acoustic signal off:
Click on .
Or: Select Tools > Acoustic signal off .
➔
The acoustic signal is deactivated; is displayed.
Activate acoustic signal:
Click on .
Or: Select Tools > Acoustic signal off .
➔
The acoustic signal is activated; is displayed.
Open the Phone window .
Open the context menu and select Ring output .
➔
The Ring settings window opens.
Click to open the list of available audio files.
You can listen to the audio files with .
Click Apply to confirm the selection.
eud-1431_POOL_en.book Page 26 Wednesday, February 15, 2012 12:30 PM