Olympus IPLEX MX II - Manual (Page 75)

69
Chapter 7 Storage and maintenance
7.3 Cleaning
„ Cleaning the insertion tube
CAUTION
• Clean the insertion tube immediately after withdrawing the insertion tube. If you leave it
uncleaned, the equipment may be stained or corroded.
• Do not use a hard cloth or hard brush for cleaning the insertion tube. Otherwise, the insertion
tube may be damaged.
1
Use a clean, soft cloth to wipe any dirt or other foreign object off of
the insertion tube.
2
If a liquid such as wastewater or machine oil is attached to the
insertion tube, first wipe it with a soft cloth or cotton, and wash well
using a neutral detergent solution and pieces of gauze. Then wipe it
with a piece of soft gauze moistened with clean water, wipe off the
moisture well and dry.
3
Inspect and clean the distal end of the insertion tube according to
“3.4 Inspecting the insertion tube” (page 25).
„ Cleaning the LCD monitor
If the LCD monitor is dirty or has fingerprints on it, wipe it with a soft cloth
dampened with clean water. Then, lightly wipe it with a clean dry cloth.
CAUTION
• Never use a chemically treated cloth or strong detergent, such as benzine or alcohol. Doing
so may damage the surface of the LCD monitor.
• Do not use a cloth that is hard, dirty, or has foreign matter on it. Doing so may damage the
surface of the LCD monitor.