Checking the lcd monitor image, Indicator display, Display language setting – Olympus IPLEX MX II User Manual
Page 47: Indicator display display language setting

41
Chapter 4 Basic operations
Checking the LCD monitor image
1
Ensure that the LCD monitor displays the observation image.
2
Make sure there are no dark patches or dirt in the image. If you find
any irregularities, go back to “3.4 Inspecting the insertion tube”
(page 25) to check it again.
NOTE
• The screen displays and menu operations are enabled approximately 40 seconds after the
power button (
) is pressed.
• When the language setting is changed, the time taken until the screen display functions, such
as menu selection, may be longer than before. This is not a malfunction.
• The displayed title is the title that was entered on the Live screen the last time the system
was used.
Indicator display
Display language setting
Select the language to be used for menus and other display text before using
the system for the first time. For more information, see “Language selection”
(page 62).
Freeze indicator
Logo
Brightness level
Zoom level
Date/time
Title
Battery indicator
Light indicator
Recording/playback indicator