Olympus IPLEX MX II - Manual (Page 72)

66
Chapter 7 Storage and maintenance
7.1 Remaining battery power
When operating IPLEX MX II with the battery, the LCD monitor displays the
remaining battery power on the top right of the screen. A guideline to remaining
battery capacity is shown as follows.
CAUTION
• Do not record or delete images and do not format USB Flash Drive if warning number (4)
shown above is displayed. If the power runs out during these operations the data could be
corrupted.
• If a warning message mentioned above (5) is displayed due to the lowering of battery power
voltage, immediately turn off the power of the main unit or connect the AC adapter. If
continuously used without any action the power will be automatically turned off which may
cause malfunction.
NOTE
• The remaining battery power can also be checked on the [POWER INDICATOR] of the
battery itself. (However, the remaining battery power shown on the LCD monitor is different.)
For details, refer to the instruction manual of your battery.
• The remaining battery power is not displayed during the AC adapter-powered operation.
• When long hours of battery-powered operation are expected or when using the instrument in
cold weather, it is recommended to prepare charged batteries as spares.
• When the battery operation time becomes extremely short, it is recommended to replace the
battery with a new battery.
• The main unit is not provided with charging capability. To charge the battery, use the optional
external battery charger.
• The battery cannot be charged using the equipment. For information on charging the battery,
refer to the manual that came with the battery charger.
(1) Remaining battery power about 50%.
(2) Remaining battery power about 25% to 50%.
(3) Remaining battery power about 5% to 25%.
(4) Remaining battery power about 2% to 5%.
(5) Remaining battery power about 1% to 2%.
This indicator flashes.
Replace with a battery that has been charged.