Olympus IPLEX MX II - Manual (Page 35)

29
Chapter 3 Preparation and inspection before observation
CAUTION
• Do not use the side view mirror adapter with the green index. They cannot be attached
correctly.
• If the red index is not completely visible, you cannot insert the distal end of the insertion tube
into or remove it from the side view mirror adapter.
• The nut will fall off the mirror if it is loosened any further after the red index is completely
visible (see below). If the nut comes off, it may be lost or the claws may be damaged. Do not
remove the nut except to clean the inside of the side view mirror adapter.
2
Slowly insert the insertion tube distal end into the side view mirror
adapter and push in till the claw inside the side view mirror adapter
is engaged with the claw on the insertion tube distal end (this
determines the rotation direction). If the side view mirror adapter
cannot be inserted, rotate it so that its mirror turns and ensure that
it is fit properly. Turn the screw clockwise until it becomes loose
and confirm that the red index gets hidden.
3
Rotate the side view mirror adapter while lightly pushing it, and
confirm that the rotation is stopped by engagement of the claw
inside the side view mirror adapter in the mirror adapter lock
groove on the insertion tube distal end.
Mirror section