Olympus VS120 User Manual

Instructions [hardware, Virtual slide system

Instructions

[Hardware]

VS120-S1

VS120-S5

VS120-L100

Virtual Slide System

S1: Single slide manual loading type
S5:

5 slides manual loading type

L100:

100 slides autoloader type

Notice

 Thank you for purchasing the OLYMPUS Virtual Slide System.

To ensure the safety, obtain optimum performance and familiarize yourself fully
with the use of this system, we recommend that you study this manual thoroughly
before operating this system.

 For the operating procedures for observation and acquisition, refer to [Simple

Operation] of the attached CD-ROM and [Online Manual] of Software.



Retain this instruction manual in an easily accessible place near the work
desk for future reference.

A X 8 0 2 5

Table of contents

Document Outline

VS120 Instructions [Hardware]
AX8025_01_H1H4.pdf
- VS120 Instructions [Hardware]
  - CAUTION
  - Registered Trademarks
  - CONTENTS
  - Introduction
    - Observe the following safety considerations
    - Handling precautions
    - Maintenance and preservation
    - Controller and software
    - General precautions to be observed
  - 1 Description of Each User Operable Part
    - 1-1-1 VS120-S1/S5
    - 1-1-2 VS120-L100
  - 2 Preparations before Starting Observation
    - 2-1 Starting the microscope system
    - 2-2 Stage operation
    - 2-3 Setting a slide glass specimen
      - 2-3-1 VS120-S1/S5
      - 2-3-2 VS120-L100
  - 3 Maintenance
    - 3-1 Replacing the halogen lamp of the microscope
    - 3-2 Correcting uneven brightness (shading correction)
    - 3-3 Overview Image Area Settings
      - 3-3-1 Overview Image Area Settings
      - 3-3-2 Save Overview Image Area
      - 3-3-3 Read Overview Image Area
  - 4 Trouble Shooting
  - 5 Specifications
  - 6 Lamp housing Inspection sheet
  - Our address