Recording a still image – Olympus IPLEX MX II User Manual
Page 58
52
Chapter 4 Basic operations
3
Note on the filenames
a. A file named IV0?????.*** is created in the USB Flash Drive when an image
is recorded.
b. The “?????” indicates a 5 digit serial number in the file name “IV0?????”.
The file number is a number between 00001 and 99999. When an image is
recorded, the filename is assigned a file number one larger than the file with
the largest file number already in the USB Flash Drive. For example,
assuming that a USB Flash Drive includes image files with file numbers
IV000001 and IV000003, recording an image creates a file named IV000004.
c. “***” is the filename extension. Performing the image recording operation
creates an image file with the filename extension .JPG.
Recording a still image
NOTE
• Still images can be recorded to the USB Flash Drive provided as standard or USB Flash
Drive recommended by Olympus.
Press the [FRZ/REC] button (briefly) on the control unit to freeze the image.
While the frozen image is displayed, press the [FRZ/REC] button again for at
least two seconds to record the still image in the USB Flash Drive. The screen
shows “STILL” during recording of a still image, the screen goes black for a
moment and then the frozen image is displayed.
Number of images
that can be recorded