Olympus IPLEX MX II - Manual (Page 41)

35
Chapter 3 Preparation and inspection before observation
CAUTION
• Hold the handle of the main unit when transporting the main unit with the control unit affixed
to the back. The main unit may fall or the excessive force to the main unit may damage
connections if you lift it by the control unit.
• Take care not to tilt or swing the main unit when carrying it with the control unit attached. Doing
so can cause the control unit to fall off and cause unforeseen accidents or personal injury.
• When transporting it with the control unit and main unit affixed to each other, take care so the
universal cable and insertion tube do not come into direct contact with the ground. A dangling
universal cable or insertion tube can become entangled with your feet causing you to fall,
which may cause personal injury, damage to this equipment, and malfunction.
• When putting down the main unit while the control unit is attached to it, always place it on its
side or base. Otherwise, the control unit and/or insertion tube may be damaged.
• Do not use excessive force or twist the control unit when it is attached to the main unit. Doing
so may damage the hanger.