Olympus IPLEX MX II User Manual
Page 43
37
Chapter 3 Preparation and inspection before observation
Two strap rings are provided for attaching the strap when
transporting the main unit. Attach the strap to the two strap
brackets and to one of the strap rings to do observations.
During observation, attach the shoulder strap so that the side with
the two connections is on the left side of the main unit, as shown in
the figure below. The two connections can also be attached to the
right side of the main unit. However, this will be unbalanced and
operation may be difficult when the control unit is attached to the
side of the main unit.
2
Adjust the length of the shoulder strap using its length adjuster.
For transport
For observation
Not attached
Length adjuster