Olympus IPLEX MX II - Manual (Page 28)

22
Chapter 3 Preparation and inspection before observation
3.3 Preparing the power supply
WARNING
• Do not bend, pull, twist, crush or apply excessive force to the power cord of the AC adapter.
Otherwise, a break in the power cord wires may cause a fire or electric shock.
• Ensure that the power cord is normal before connecting it. Using a power cord with
irregularities may result in an electric shock.
• Be careful not to injury yourself when replacing the battery.
CAUTION
• Be careful not to accidentally drop the battery during replacement.
• Before using the battery, read the dangers, warnings and cautions in “Handling of the battery”
under “Important Information – Please Read Before Use” on (page 7).
• The battery indicator flashes when a battery is continuously used under low-voltage
conditions. In such case immediately turn off the power of the main unit or connect the AC
adapter. If continuously used without any action the power will be automatically turned off
which may cause malfunction.
• Do not remove AC adapter or battery while the system is running. It may cause malfunction.
„ Supplying power from the battery
1
Check to make sure that main unit power is turned off.
2
Return the handle to its storage position.
3
Move the lock release lever on the battery cover as shown in the
figure below to open the battery cover.
Lock release lever